جامعة أمحمد بوقرة, بومرداس

PUBLICATIONS

Publications Internationales :

Année 2016 :

• 1. Limam Amel, Zerizer Abdellatif, Quenard Daniel, Sallee Hebert, Chenak Abdelkrim." Experimental thermal characterization of bio-based materials (Aleppo Pine wood, cork and their composites) for building insulation." Elsevier,Energy and Buildings . Available online 7 January 2016. doi:10.1016 /j.enbuild.2016.01.007.
• 2. C. Belkacemi, B. Bezzazi. Sandwich panels from cork and polyester in presence of epoxy resin as interfacial adhesive" Vol.11 (24), pp. 336-346, December. 2016 DOI:10.5897/IJP S2016.4541. ISSN: 1992-1950.
• 3. A. Limam,A. Zerizer, D. Quenard, « Determination of acoustic parameters of bio-based materials distended for building: Application case to Aleppo pine wood cork and their composites», Wood Research, Vol. 61 (1),2016, pp 25-34: ISSN:1336-4561, http://www.woodresearch.sk/articles.php ?volume=14&issue=52.
• 4. M. Hocine, A. Guittoum, M. Hemmous, D. Martínez-Blanco, P. Gorria, B. Rahal, J.A. Blanco, J.J. Sunol, A. Laggoun. "The role of silicon on the microstructure and magnetic behaviour of nanostructured (Fe0.7Co0.3)100-xSix powders". Journal of Magnetism and Magnetic Materials. Volume 422, 15 January 2017, Pages 149–156.
• 5. F.Bencouici, M.Bououdina, A.ADakhel, T.Souier , R.Tala-Ighil, M.Toubane, A.Iratni, S.Liu, W.Cai « Al doping effect on the morphological, structural and photocatalytic properties of TiO2 thin layers » Thin Solid Films (2016). 10.1016/J .TSF.2016.09.046
• 7. A.Guesmia, M.Msimanga, C.A.Pinda-Vargas, H.Ammi, A.Dib, S.Mammeri « Slowing down of 2-11MeV C12, O16 ,Si28 andCu63heavy ions through Si3N4thim foil by using Time-of-Flight spectrometry » Nuclear Instruments and Methods in Physics Research B 371(2016) 69-75 http:/dx.doi.org/ 10.1016/j. nimb . 2015. 10.058.
• 8. Rafik.Halimi, Boudjema .Bezzazi, Ali.Badidi Bouda, M’hamed .Djelloul Abbou and Oussama .M. « Study and analysis of mechanical and viscoelastic behavior in flexure of laminated composites » international journal of Materials Research; Vol.107, Issue 1 (January 2016). www.hanser-elibrary.com/doi/abs/10.3139/146.111310.
• 9. Djamila Aboutaleb and Brahim Safi « Structure and Properties of the Soda-Borate Glasses; Effect of Adding Fe2O3 Concentration » J Chem Eng Process Technol 2016. 7; 1 http://dx.doi.org/10.4172/ 2157-7048.1000268.
• 10. Bahia Rabhi, Youcef Ghernouti, Khaled Boumchedda, Alex Li and Abdelkader Drir. « Durability and thermal stability of ultra high-performance fibre-reinforced concrete (UHPFRC) incorporating calcined clay »European journal of Environmental and Civil Engineering, 2016. http://dx.doi.org/10.1080/19648189. 2016.1139508
• 11. H.Belkhalfa, H .Ayed, A.Hafdallah, M.S.Aida, R.Tala Ighil. « Characterization and studying of ZnO thin films deposited by spray pyrolysis; Effect of annealing temperature » Optik-International Journal for Light and Electron Optics Volume 127 issue4, February2016, page (2336-2340). doi10.1016/j.ijleo.2015.11.126.
• 12. Nassima Benferrah, Mohamed Hammadi, Christian philouze, Florian Berthiol, Fabrice Thomas. « Copper (II) complex of a Schiff base of dehydroacetic acid: Characterization and aerobic oxidation of benzyl alcohol »Inorganic Chemistry Communications Volume 72, October 2016, Pages 17–22. http://dx.doi.org/10.1016/j.inoche.2016.07.020
• 13. H.Belkhalfa,Florina Teodorescu,Gurvan Queniat, Yannick Coffinier , Nahed Dokhan,Sabrina Sam, Amar Abderrahmani, Rabah Boukheroub, Sabine Szunerits. «Insulin impregnated reduced graphene oxide/Ni (OH) 2 thin films for electrochemical insulin release and glucose sensing » Sensors and Actuators B: Chemical Volume 237, December 2016, Pages 693–701.http://dx.doi.org/10.1016/j.snb.2016.06.132.
• 14. Ait Ahsene, Fetta « Etude des composes toxiques issus de L'incinération des médicaments perimes et des dasri « 2016 http://dlibrary.univboumerdes.dz:8080/handle/123456789/2955.
• 15. M.Toubane, R.Tala-Ighil, F.Bencouici, M.Bououdina, S.Liu, W.Cai T.Souier, A.Iratni « Structural, optical and photocatalytic properties of ZnO nanorods: Effect of aging time and number of layers« Ceramics InternationalVolume 42, Issue 8, June 2016, Pages 9673–9685. http://dx.doi.org/10.1016/j.ceramint.2016.03.056.
• 16. Qian Wang, Yao Ma, Xin Jiang, Nianjun Yang, Yannick Coffinier, Hakim Belkhalfa, Nahed Dokhane, Musen Li, Rabah Boukherroub, and Sabine Szunerits. « Electrophoretic Deposition of Carbon Nanofibers/Co (OH) 2 Nanocomposites: Application for Non-Enzymatic Glucose Sensing »Electroanalysis 2016, 28,119-125. www.electroanalysis.wiley-vch.de.
• 17. Fouzia Benoudjit, Mohamed Amine Benoudjit, Messaoud Hachemi « Seasonal characterisation of the local sewage sludge »Fresenius Environmental Bulletin Volume 25-No.4/2016.pages 1175-1182.
• 18. Mohamed Zeghad, Jozef Mitterpach, Brahim Safi, Belaid Amrane, Mohamed Saidi. «Reuse of Refractory Brick Wastes (RBW) as a Supplementary Cementitious Material in a Concrete »Periodica Polytechnica Civil Engineering 2016 paper. DOI:10.3311/ppci.8194
• 19. D. Moudir, S.Ikhaddalene, N.Kamel, A.Benmounah.F. Zibouche, Y.Mouheb, F.Aouchiche « Effet of the Iron Conecntration on the Properties of an Aluminosilicate Glass used for Storage of Radioactive Waste» Fresenius Environmental Bulletin Volume 25-No. 4/2016. Pages 1051-1058.
• 20. Haddoum, Nadia, Hadjadj, Ahmed, & Benmounah, Abdelbaki. Study assesses materials to minimize mud losses in Algeria's Hassi Messaoud field. Oil & Gas Journal, 2016, vol. 114, no 3, p. 48-54.
• 21. Sara Benzitouni, Mourad Zaabat,Aicha Khial, Damil Rechem, Ahlem Benaboud, Dhikra Bouras, Abdelhakim Mahdjoub, Mahdia Toubane, Raphael Coste « High Sensitivity of Porous Cu-Doped SnO2Thin Films to Methanol ». Advances in Nanoparticles, 5,140-148 . http://dx.doi.org/10. 4236/anp.2016.52016
• 22. B.Bouaouina,A.Besnard,S.E.Abaidia,F.Haid «Residuel stress, mechanical and microstructure properties of multilayer Mo2N/CrN coating produced by R.F Magnetron discharge »Applied Surface Science 2016. http://dx.doi.org/10. 1016//j.apsusc.2016.04.024
• 23. M.Saidi, B. Safi «Effect of mineral additives (natural pozzolana and sand of dunes) by substitution of cement on the performance and durability of mortars »Materials Science and Engineering 123 (2016) doi:10.1088/1757-899X/123/1/012015.
• 24. M.Hamiane, C.Assafsaf. « Use of Thermo-Hygro Buttons in Tracking The Influence Of Humidity And Temperature On The Deterioration Of The Building Stones Of The Mausoleum Of Imedghassen Batna In Algeria »MATEC Web of Conferences66. DOI:10.105/matecconf/20166600013.
• 25. Ammar Malek, Benamar Benotmane, Chouaib Aribi, Messaoud Hachemi. «Chimical Transformation of Chromed Leather Wastes into Environmentally Harmless Fibrous Biomass» Environment Protection Engineering (2016) Vol 42 DOI: 10.5277/epe160314.
• 26. Rabah .Chaid, Laurent Molez, Malika.SabriaMansour, Aissa.Talah. « Comportement des BHPde laitier soumis aux cycles immersion-séchage » Journal of Materials and Engeering Structures 3 (2016) 23-33.
• 27. M.Hocine, A.Guittoum, M.Hemmous, D.Martinez, P.Gorria, B.Rahel, J.A. Blanco, J.J.Sunol, A.Laggoun. « The role of silicon on the microstructure and magnetic behavior of nanostructured (Fe0.7Co0.3)100-xSix powders » journal of Magnetism and Magnetic Material http://dx.doi.org/10.1016/j.jmmm.2016.08.05
• 28. F Benhaoua, A. Ayadi, N Stiti, Y Lamri, H Ratni « Elaboration and characterization of a cellular glass based cullet loaded with Carbon fibers » Materials LettersVolume 160 (2016), Pages 278–281 http://dx.doi.org/10.1016/j.matlet.2015.07.095.
• 29. Qian Wang, Yao Ma, Xin Jiang, Nianjun Yang, Yannick Coffinier, Hakim Belkhalfa, Nahed Dokhane, Musen Li, Rabah Boukherroub, and Sabine Szunerits. "Electrophoretic Deposition of Carbon Nanofibers/Co(OH)2 Nanocomposites: Application for Non-Enzymatic Glucose Sensing" Electroanalysis 2016, 28, 119–125. DOI: 10.1002/elan.201500417.

Année 2015 :

• 1. F. Bensouici, T. Souier, A.A. Dakhel, A. Iratni, R. Tala-Ighil, M. Bououdina ‘’Synthesis, characterization and photocatalytic behavior of Ag doped TiO2 thin film . Superlattices and Microstructures, Volume 85, September 2015, Pages 255-265.
• 2. H. Belkhalfa, H. Ayed, A. Hafdallah, M.S. Aida, R. Tala Ighil." Characterization and studying of ZnO thin films deposited by spray pyrolysis: Effect of annealing temperature." Elsevier, Optik 127(2016) 2336–2340. http://dx.doi.org/10. 1016/j.ijleo.2015.11.12
• 3. Mohammed Saidi , Brahim Safi , , Abdelbaki Benmounah , Nadjiba Megdoud , Faiza Radi," Physico-mechanical properties and thermal behavior of firebrick-based mortars in superplasticizer presence. Construction and Building Materials. ScienceDirect 104 (2016) 311–321. http://dx.doi.org/10.1016/j.conbuildmat.2015.12.026 ISSN 0950-0618.
• 4. Rafik Halimi, Boudjema Bezzazi, Ali Badidi Bouda, M'hamed Djelloul Abbou, and Oussama Mimouni (2015). Study and analysis of mechanical and viscoelastic behavior in flexure of laminated composites. International Journal of Materials Research. e-first Article. Posted online on 27 Oct 2015. doi: 10.3139/146.111310
• 5. Bouzid Mohammed, Djadi Amina , Bezzazi Boudjema "Complex di-hydrate calcium phosphate - glutaraldehyde: formulation mechanism" European Scientific Journal October 2015 /SPECIAL/ edition Vol.2 ISSN: 1857 – 7881 (Print) e - ISSN 1857- 7431. p.118-126.
• 6. Bouzid Mohammed and Djadi Amina "Revaluation of activated sludge and chicken manure through composting by aerobic process" .African Journal of Agricultural Research. Vol. 10(52), pp. 4831-4836, 24 December, 2015 . DOI: 10.5897/AJAR2015.9950 . http://www.academicjournals.org/ AJAR.
• 7. Z. Belouadah, A. Ati, M. Rokbi, " Characterization of new natural cellulosic fiber from Lygeum spartum L. Carbohydrate Polymers, Volume 134, 10 December 2015, Pages 429-437.
• 8. Ammar Malek, Chouaib Aribi."Mechanical and physicochemical characterization of an epoxy-based composite reinforced with fibrous biopolymer" by Product Fibers and Polymers, November 2015, Volume 16, Issue 11, pp 2458-2462, ISSN: 1229-9197 (Print) 1875-0052.
• 9. DOKARI, H.; HAMMADI, M.; BENFERRAH, N.; RACHEDI, Y. "Formation of Benzylidenes-Diacetates Catalyzed by Activated Zeolite "LZY-562" and Clay (K10/ZnCl2): An Unexpected Functional Selectivity " Asian Journal of Chemistry . 2015, Vol. 27 Issue 6, p1973-1976.DOI:10.14233/ajchem.2015.15881#sthash.8twtPlMW.dpuf
• 10. F. Benhaoua, A. Ayadi, N. Stiti, Y. Lamri, H. Ratni (2015); Elaboration and characterization of a cellular glass based cullet loaded with carbon fibers, Sciencedirect; Materials Letters, Volume 160, 1 December 2015, Pages 278–281, doi:10.1016/j.matlet.2015.07.095
• 11. Mohammed Saidi, Brahim Safi, Khaled Bouali, Abdelbaki Benmounah, Madjid Samar, (2015); Improved behavior of mortars at a high temperature by using refractory brick wastes, Indersciences Publishers; International Journal of Microstructure and Materials Properties, 2015. http://www.inderscience.com/info/ingeneral/forthcoming.php?jcode=ijmmp
• 12. Qian Wang, Yao Ma, Xin Jiang, Nianjun Yang, Yannick Coffinier, Hakim Belkhalfa, Nahed Dokhane, Musen Li, Rabah Boukherroub and Sabine Szunerits (2015); Electrophoretic Deposition of Carbon Nanofibers/Co(OH)2 Nanocomposites: Application for Non-Enzymatic Glucose sensing, Electroanalysis; Article first published online: 23 SEP 2015; DOI: 10.1002/elan.201500417
• 13. S. Blizak, G. Bihlmayer, S. Blügel, and S. E. H. Abaidia, (2015) Interlayer exchange coupling between FeCo and Co ultrathin films through Rh(001) spacers; Phys. Rev. B 91, 014408 – Published 9 January 2015; DOI: http: //dx.doi.org/10.1103/PhysRevB.91.014408
• 14. Naima Haddadoua, Rabah Chaid and Youcef Ghernouti, (2015) Experimental study on steel fibre reinforced self-compacting concrete incorporating high volume of marble powder, European Journal of Environmental and Civil Engineering, Volume 19, Issue 1, 2015, pages 48-64; 10.1080/19648189.2014.929537
• 15. Aldjia Boutiba, Rabah Chaid,Laurent Molez,Raoul Jauberthie, (2015) Ripening in Chemically Aggressive Environment the HPC Reinforced with Hybrid Steel Fiber, Periodica Polytechnica Civil Engineering, (2015) e-first paper 7899, http://www.pp.bme.hu/ci/article/view/7899
• 16. N. Benferrah, M. Hammadi, F. Berthiol "Potassium fluoride-barium oxide catalysis in an easy and efficient synthesis of methysticin from piperonal under microwave irradiation." Russian Journal of General Chemistry August 2015, Volume 85, Issue 8, pp 1939-1944 .ISSN: 1070-3632 .Pleiades Publishing Ltd, 2015
• 17. S. Ladjouzi, R. Tala-Ighil, A. Iratni, M. Izerrouken, L. Guerbous, S. Hadji, F. Bensouici, F.J. Pérezγ- ‘’Ray irradiation effect on GdBO3/silica: Ce3+ composite prepared by sol gel method’’ Radiation Physics and Chemistry, Volume 114, September 2015, Pages 1-4
• 18. Amar Irekti, Boudjema Bezzazi, Agnès Smith and Chouaib Aribi " Experimental study of dielectric properties of composite materials pozzolan/DGEBA" Journal Polymer Composites. 1548-0569. (2015). DOI: 10.1002/pc.23589. http://onlinelibrary.wiley.com/doi/10.1002/pc.23589/abstract.
• 19. Khaled Benyounes and Abdelbaki Benmounah "Rheological and electrokinetic characterization of bentonite particles in aqueous phase in presence of KCl " Particulate Science and Technology: An International Journal Published. Online: 11 May 2015. DOI:10.1080/02726351.2015.1042563
• 20. D.E. Djemiat, A. Safri, A. Benmounah, B. Safi : Rheological behavior of an Algerian crude oil containing Sodium Dodecyl Benzene Sulfonate (SDBS) as a surfactant: Flow test and study in dynamic mode; Journal of Petroleum Science and Engineering, Volume 133, September 2015, Pages 184–191 :http://www.sciencedirect.com/science/article/pii/S092041051500203X
• 21. B. Safi , S. Zarouri, R. Chabane-Chaouache, M. Saidi, A. Benmounah; Physico-chemical and rheological characterization of water-based mud in the presence of polymers; Springer: Journal of Petroleum Exploration and Production Technology, 29 May 2015, pp: 1-6 http://link.springer.com/article/10.1007%2Fs13202-015-0182-x
• 22. D. Aboutaleb, B. Safi; Lithium Oxide Effect on the Thermal and Physical Properties of the Ternary System Glasses (Li2O3-B2O3-Al2O3), International Journal of Chemical, Molecular, Nuclear, Materials and Metallurgical Engineering Vol:9, No:3, 2015, pp: 414-417 http://waset.org/publications/10000714
• 23. Z. Ait-Djafer, N. Saoula, H. Aknouche , B. Guedouar , N. Madaoui. Deposition and Characterization of Titanium Aluminum Nitride coatings prepared by RF magnetron sputtering. Applied Surface Science (2015), http://dx.doi.org/10.1016/j.apsusc.2015.02.053
• 24. Fetta Ait Ahsene-Aissat , Yacine Moussaoui , Yacine Kerchiche, Feriel Guenane , Messaoud Hachemi. “ PCCD/Fs and BTEXs in the vicinity of an industrial waste incinerator in northen Algeria ”. Published in Fresenius Environmental Bulletin. Volume 24 (2015), No. 4, p.1318-1325.
• 25. Razika TALA-IGHIL, Mahdia TOUBANE, Fayçal BENSOUICI, Amel SLIMANI, D. HAOUANOH, Aicha IRATNI and Samira SALI " Effect of back contact material on czts solar cells simulated with amps" Journal of Applied Physical Science International, ISSN: 2348-0130 , 2015 Vol.: 3, Issue.: 1 Page 1-6. http://www.ikpress.org/abstract.php?iid=538&id=33&aid=3950#sthash.SKCuSlKB.dpuf
• 26. Y. Ghernouti, B.Rabehi, T.Bouziani, H. Ghezraoui, A. Makhloufi. “Fresh and hardened properties of self-compacting concrete containing plastic bag waste fibers (WFSCC)” Construction and Building Materials. 82 (2015) 89- 100. http://www.sciencedirect.com/science/article/pii/S095006181500210X
• 27. I. Haddadou, D. Aliouche, N. Brosse, S. Amirou, "Characterization of cellulose prepared from some Algerian lignocellulosic materials (zeen oak wood, Aleppo pine wood and date palm rachis)" European Journal of Wood and Wood Products. Springer Berlin Heidelberg. May 2015, Volume 73, Issue 3, pp 419-421. DOI 10.1007/s00107-015-0903-3.
• 28. Nadia Lakreb, Boudjema Bezzazi, Helena Pereira "Mechanical strength properties of innovative sandwich panels with expanded cork agglomerates" European Journal of Wood and Wood Products. Springer Berlin Heidelberg. July 2015, Volume 73, Issue 4, pp 465 - 473. DOI 10.1007/s00107-015-0908-y.
• 29. H. Dilmi, C. Aribi, B. Safi, B. Bezzazi, M. Saidi, O. Lounas. The fatigue flexural behavior of fiber reinforced concrete: Effect of the parameters of coarse aggregates. Vol.10(1), Sci. Res. Essays ISSN: 1992-2248, pp. 31-40 , January 2015 DOI: 10.5897/SRE2014.6137 ,
• 30. R. Souag, N. Kamel , M. Hammadi , Z. Kamel , D. Moudir , F. Aouchiche , Y. Mouheb and S. Kamariz. "Study of leaching of a 2M-Zirconolite (Ca0,83Ce0,17ZrTi1,66Al0.34O7) in acidic and basic media" Journal of Ceramic Processing Research. Vol. 16, No. 1, pp. 150~155 (2015). http://jcpr.kbs-lab.co.kr/file/JCPR_vol.16_2015/JCPR16-1/_282014-068_150-155.pdf
• 31. B. Safi , M. Saidi , A. Daoui , A. Bellal , A. Mechekak , K. Toumi, ” The use of seashells as a fine aggregate (by sand substitution) in self-compacting mortar (SCM)’’ Science Direct , Construction and Building Materials 78 (2015) 430–438. http://dx.doi.org/10.1016/j.conbuildmat.2015.01.009

Année 2014 :

• 1. Lakreb, N., Bezzazi, B., Pereira, H., ''Mechanical behavior of multilayered sandwich panels of wood veneer and a core of cork agglomerates.'' Materials and Design,ISSN: 0261-3069, Science Direct (2014), http://dx.doi.org/10.1016/j.matdes.2014.09.059
• 2. Hanafi Y, Szymczyk A, Rabiller-Baudry M, Baddari K. Degradation of poly(ether sulfone)/polyvinylpyrrolidone membranes by sodium hypochlorite: insight from advanced electrokinetic characterizations. Environ Sci Technol. 2014 Nov 18; 48(22):13419-26. doi: 10.1021/es5027882.
• 3. B. Hami, A. Irekti, C. Aribi, B. Bezzazi, A. Mir, »Experimental study of sandwich multilayer reinforced by glass fibre and agglomerated cork" Advanced composite letters.Volume 23, Issue 5, 2014. ISSN 0963- 6935. http://www.acletters.org/02,02,23.html
• 4. Bouzid Mohammed, Bezzazi Boudjema, Djadi Amina, Ait Amar Hamid, Ghouini Ahmed," Aspect toxicologique et physicochimique du 1,5-dipentanal. European Scientific Journal vol.10, No.36, December 2014 edition 230-261. ISSN: 1857 – 7881 (Print) e - ISSN 1857- 7431.
• 5. M. Bouzid, A. Djadi, C. Aribi, A. Irekti, B. Bezzazi, F. Halouene, “Multilayer System of Thermosetting Polymers and Specific Confining, Application to the Walls of the Hospital unit“ The Journal of Materials Science, Photon 120 (2014) 175-184, Original Research Article. ISJN: 6259-3864 https://sites.google.com/site/photonfoundationorganization/home/the-journal-of-materials-science
• 6. Madjid Samar, Abdelbaki Benmounah, Brahim Safi, Rabia Kheribet and Mohammed Saidi. "Influence Of Nanosilica And A Polycarboxylate Superplasticizer On The Rheological And Electrokinetical Properties Of Cement Pastes". DOI : 10.5897/SRE2014.6001. Vol.9(24), pp. 1003 - 1118, December 2014 ISSN : 1992-2248.
• 7. R. Souag, N. Kamel, Y. Mouheb, M. Hammadi, Z. Kamel, D. Moudir, F. Aouchich, S. Kamariz. “ Study of the Effect of Ca/Mg Alkali-Oxides Ratio on the Structure of a Glass-Ceramic Based on an Aluminosilicated Glass Containing 2wt.% of Zirconolite Crystalline Phase”.Science of Sintering, 46 (2014) 377-383. doi: 10.2298/SOS1403377S. http://www.iiss.sanu.ac.rs/download/vol46_3/vol46_3_11.pdf
• 8. Feyriel Dridi, Nathalie Bar, Odile Sainte-Catherine, Messaoud Hachemi, Marc Lecouvey, Didier Villemin. Synthesis of new intercalated quinones and their cytotoxic effects on cancer cell lines. Eur. Chem. Bull., 2014, 3(10), 1020-1026 1020. http://www.eurchembull.com/index.php/ECB/article/view/1513
• 9. Azzedine Ayadi , F. Benhaoua, Laurent Le Gendre, Ratiba Benzerga, N. Stiti, « Gravimetric and Differential Thermal Analysis of Cullet-Based Glass Foams”. Key Engineering
• 10. Amel Slimani, Aicha Iratni, Hervé Henry, Mathis Plapp, Jean-Noël Chazalviel, François Ozanam and Noureddine Gabouze “ Macropore formation in p-type silicon: toward themodeling of morphology” Nanoscale Research Letters 2014, 9:585. http://www.nanoscalereslett.com/content/9/1/585
• 11. T. Zergoug , S. E. H. Abaidia , A. Nedjar , M. Y. Mokeddem “Adsorption and diffusion of oxygen atom on UN2(100) surface and subsurface: a density functional theory study (DFT and DFT + U)” Journal of Nanostructure in chemistry . Springerlink.com. 2014, DOI 10.1007/s40097-014-0130-1.
• 12. Mohammed Bouzid, Amina Djadi, and Samira Guechtoulli, “ The Dicalcium Phosphate Dihydrate Fixator and Stabilizer of 235 Glutaraldehyde” , Ceramic transactions journal, Volume 249 pp. 235-244, ISSN: 1042-1122 http://download.e-bookshelf.de/download/0002/8674/69/L-G-0002867469-0004670857.pdf
• 13. D. Brinis, A. Laggoun, D. Ledue,R. Patte. Effects of dimensionality and spatial distribution on the magnetic relaxation of interacting ferromagnetic nanoclusters: A Monte Carlo study. J. Appl. Phys. 115, 173906 (2014); http://dx.doi.org/10.1063/1.4873298
• 14. Dalila Moudir, Nour-el-hayet Kamel, Abdelbaki Benmounah, Yasmina Mouheb, Rafika Souag, Boudjma Bezzazi, Fairouz Aouchiche, Ziane Kamel and Soumia Kamariz. Influence of the Crystal Growth Temperature on the Formation of Zr Reach Crystalline Phases in a Nuclear Waste Confinement Glass Ceramic. Journal of Materials Science and Engineering B 4 (8) (2014) 220-225. David Publishing ISSN:A: 2161-6213; B: 2161-6221. http://www.davidpublishing.org/show.html
• 15. Brinis, D.; Ledue, D.; Laggoun, A.; Patte, R. Monte Carlo. Investigation of Magnetization Switching of Interacting Ferromagnetic Nanoclusters.Sensor Letters, Volume 12, Number 1, January 2014, pp. 113-117(5). http://dx.doi.org/10.1166/sl.2014.3221
• 16. A. Beddiar, R. Zitoune, F. Collombet, Y.H. Grunevald, M.T. Abadlia & N. Bourahla. ”Compressive behaviour of concrete elements confined with GFRP-prefabricated bonded shells” European Journal of Environmental and Civil Engineering.Taylor & Francis group. Published online: 27 Jun 2014. DOI:10.1080/19648189.2014.929538.
• 17. Laggoun, A. Guitoum, S. Bahamida, M. Boudissa, A. Fnikidi. “Structural and Mössbauer studies of evaporated Fe100-x Pdx thin films”. European Physical Journal Applied Physics. ISSN : 1286-0042. DOI:10.1051/epjap/2014140195.
• 18. Farida Ait Medjber, Mohammed Saidi, Brahim Safi, Madjid Samar “Strength improvement of a High Performance Fiber Reinforced Concrete (HPFRC) containing local raw materials” International Journal of Physical Sciences. ISSN: 1992-1950.Vol.9 (18), pp. 402-412, September 2014. DOI : DOI:10.5897/IJPS2014.4185
• 19. Djadi Amina, Ait-Amar Hamid, Bouzid Mohammed,” Etude de la réactivité microbiologique et de l’effet toxique sur carassius auratus du glutaraldehyde. European Scientific Journal July 2014 edition vol.10, No.21 ISSN: 1857 – 7881 (Print) e - ISSN 1857- 7431. http://eujournal.org/index.php/esj/article/view/3852
• 20. Abdelhakim Daoui; Brahim Safi; Malika Rezak; Abdellatif Zerizer « Use of wood waste (Aleppo pine) as a superplasticiser in self-compacting mortars » Journal Advances in Cement Research, ISSN: 0951-7197, E-ISSN: 1751-7605, 11 September 2014,DOI: 10.1680/adcr.14.00043, http://www.icevirtuallibrary.com/content/article/10.1680/adcr.14.00043;jsessionid=bf7w18wvd8r7.x-telford-live-01
• 21. Naima Haddadou, Rabah Chaid & Youcef Ghernouti. “Experimental study on steel fiber reinforced self-compacting concrete incorporating high volume of marble powder” European Journal of Environmental and Civil Engineering. Published online: 26 Jun 2014.DOI:10.1080/19648189.2014.929537. Taylor & Francis group. http://www.tandfonline.com/doi/abs/10.1080/19648189.2014.929537?src=recsys#.VBf4epR5NYc
• 22. Rabah Chaïd, Saïd Kenaï, Hamid Zeroub & Raoul Jauberthie. “Microstructure and permeability of concrete with glass powder addition conserved in the sulphatic environment.” European Journal of Environmental and Civil Engineering.Taylor & Francis group. Published online: 30 Jul 2014. DOI:10.1080/19648189.2014.939310.
• 23. Youcef Ghernouti, Bahia Rabehi, Brahim Safi and Rabah Chaid. “Use of recycled plastic bag waste in the concrete” Journal of International Scientific Publications: Materials, Methods and Technologies. Volume 8, pp : 480-487. 2014. http://www.scientific-publications.net
• 24. Bahia Rabehi, Youcef Ghernouti and Miloud Driss “Potential Use of Calcined Silt of Dam as a Pozzolan in Blended Portland Cement”,International Journal of Concrete Structures and Materials Vol.8, No.3, pp.259–268, September 2014. http://link.springer.com/article/10.1007/s40069-014-0072- 5
• 25. C. Belkacemi and B. Bezzazi, “Quasi-static mechanical characterization and fatigue of a composite laminates” Advances in Applied Science Research, 2014, 5(3):328-335. Pelagia Research Library. ISSN: 0976-8610. CODEN (USA): AASRFC. www.pelagiaresearchlibrary.com
• 26. F. Bensouici, T. Souier, A. Iratni, A.A. Dakhel, R. Tala-Ighil, M. Bououdina “Effect of acid nature in the starting solution on surface and photocatalytic properties of TiO< sub> 2 thin films” Surface and Coatings Technology - Journal - Elsevier ISSN: 0257-8972 , Volume 251, (2014), Pages 170–176 http://dx.doi.org/10.1016/j.surfcoat.2014.04.021
• 27. Siham Amirou, Jizhi Zhang, H.A. Essawy, A. Pizzi, A. Zerizer, J. Li and L. Delmotte “Utilization of hydrophilic/hydrophobic hyperbranched poly(amidoamine)s as additives for melamine urea formaldehyde adhesives” Polymer Composites, POLYM. COMPOS., 35:1229–1237, 2014. © 2013 Society of Plastics Engineers , DOI: 10.1002/pc.23138, http://onlinelibrary.wiley.com/doi/10.1002/pc.23138/references
• 28. Tayeb Bouziani, Abdelbaki Benmounah, Zoubir Makhloufi, Madani Bédérina & Michèle Queneudec T’kint. “Properties of flowable sand concretes reinforced by polypropylene fibers, Journal of Adhesion Science and Technology, (2014). http://dx.doi.org/10.1080/01694243.2014.924176.
• 29. F. Hamadi, K. Boudif, H. Gougam, A. Djouab, T. Allane, A. Benmounah, S. Benamara. « Caractérisation d’une préparation semi-solide traditionnelle antibrûlure » Revue Phytothérapie Springer-Verlag France 2014. DOI 10.1007/s10298-014-0860-8.
• 30. Kennouche .S, A. Zerizer, N. Sitouah, A. Aknouche, M. Frédéric « Characterization Of Algerians Oak Wood By X-R Ay Tomogr Aphic Scanner And Free Software Image-J» Wood Research, 59 (2), 2014, pp 335-342: ISSN: 1336-4561, http://www.woodresearch.sk/articles.php
• 31. Lakhdar Salim Guebboub, Massaoud Hamiane, Saidi Mohammed. “Study of the Hydric Behavior of the Composite in Earth Elaborated With the Local Raw Materials «International Journal Of Scientific & Technology Research. Volume 3, Issue 1, January 2014, ISSN 2277-8616 33. www.ijstr.org
• 32. Abdelhak Bentriou , Karim Fourar, Abdelbaki Benmounah And Bahim Safi “Comparative Study of Biopolymers Action on Physicochemical and Rheological Properties of Water-based Drilling Muds”Asian Journal of Chemistry; Vol. 26, No. 15 (2014), www.Asianjournalofchemistry.com
• 33. Abdelhakim Daoui, Clément Descamps, Abdellatif Zerizer, Rémy Marchal et Bartosz Pałubicki « Variation de l’épaisseur du placage de déroulage des bois et son influence sur les caractéristiques mécaniques des panneaux LVL » MATEC Web of Conferences, ISSN : 0023-7302 ; e-ISSN : 1297-9694 11, 01041 (2014) http://dx.doi.org/10.1051/matecconf/20141101041
• 34. Aldjia Boutiba, Rabah Chaid, Laurent Moulez and Raoul Jauberthie “Effect of sulfur aggregates on mechanical resistance and durability for SFRHPC with the addition of slag” MATEC Web of Conferences, ISSN: 0023-7302 ; e-ISSN: 1297-9694 11, 01041 (2014) http://dx.doi.org/10.1051/matecconf/20141103005
• 35. A. Guesmia , H. Ammi b,n , S. Mammeri , A. Dib , C.A. Pineda-Vargas , M. Msimang , M. Hedibel ”Semi empirical formula for electronic stopping power determination of 24Mg, 27Al and 28Si ions crossing Formvar foil in the ion energy domain of LSS theory” Radiation Physics and Chemistry Volume 96, March 2014, Pages205–210. http://www.sciencedirect.com/science/article/pii/S0969806X13005422

Année 2013 :

• K. Chebout, A. Iratni, A. Bouremana, S. Sam, A. Keffous, N. Gabouze, “Electrical characterization of ethanol sensing device based on Vanadium oxide/Porous Si/Si structure”. Solid State Ionics 253 (2013) 164–168.
• Siham Amirou, Imane Haddadou, Abdellatif Zerizer « Thermal Behaviour of Five Different Date Palm Residues of Algeria by Thermogravimetric Analysis” PRO LIGNO online version (2013) Volume 9, Issue 2
• O. Djebili, F. Bolaers, A. Laggoun and J. P. Dron. ”Methodological approach of selecting a vibration indicator in monitoring bearings, International journal of physical sciences, edition Academic Journals. Volume 8 (12), pp.451-458, 30 March, 2013.
• K. Messaoud-Boureghda, M.Z. Messaoud-Boureghda, F. Halouane. “Conception of hydrofiber wound dressing from cellulose of esparto”. Research & Reviews In polymer, Volume 4 Issue 2, 2013 (p.37-44).
• R.Tala-Ighil. “Simulated multi-crystalline silicon solar cells with aluminum back surface field”. Materials Science, Volume 9 Issue 7, 2013 [277-281].
• Siham Amirou, Abdelatif Zerizer, Antonio Pizzi, Imane Haddadou, Xiaojian Zhou“Particleboards production from date palm biomass” European Journal of Wood and Wood Products, Print, Volume 71, Issue 4, July 2013.
• Djamila Aboutaleb, Brahim Safi, Azzeddine Ayadi and Aicha Iratni ” Effect of the AL2O3 and BaO Addition on the Thermal and Physical Properties of Ternary Glass System (B2O3- BaO-AL2O3)”Journal of Materials Science and Engineering A & B, Volume 3, Number 5, May 2013.
• C. Oubraham, S. Drizi, B. Safi, A. Benmounah “Simulation and modeling the deferred behavior induced by the creep of a reinforced concrete section” European Scientific Journal Vol 9, No 24 (2013).
• Bahia Rabehi, Youcef Ghernouti & Khaled Boumchedda “Strength and compressive behaviour of ultra high-performance fibre-reinforced concrete (UHPFRC) incorporating Algerian calcined clays as pozzolanic materials and silica fume” European Journal of Environmental and Civil Engineering (2013) (Print), 2116- 7214 (Online) - Taylor & Francis.
• Omar Djebili, Fabrice Bolaers, Ali Laggoun and Jean-Paul Dron,"Following the growth of a rolling fatigue spalling for predictive maintenance". Mechanics & Industry / Volume 14 / Issue 01/ January 2013, pp 85- 93
• Nour-el-Hayet Kamel, Dalila Moudir, Ziane Kamel, Abdelmoumene Djerridi, Samy Mouhamou, Abdelbaki Benmounah, Rafika Souag, Mustapha Taouinet and Hamid Ait-Amar "Effect of the Ce Content on a Nuclear Waste Glassy Matrix in the System SiO2-Al2O3-CaO-MgO-ZrO2-TiO2, Synthesized at a Low Melting Temperature" Journal of Materials Science and Engineering A volume 3 Number (4) April (2013) 209-223 .
• Kennouche .S., Zerizer .A., Benmounah .A., Hami .B., Mahdad .M., Benouali .H.and Bedjou .S. “Formulation and characterization of self compacting concrete with silica fume” Journal of Engineering and Technology Research, 2013 Academic Journals Vol. 5(5), pp. 160-169, June2013 .
• Safi B.; Ghernouti Y.; Rabehi B.; Aboutaleb D. “Effect of the heat curing on strength development of selfcompacting mortars containing calcined silt of dams and Ground Brick Waste” Materials Research, Print version, (2013)
• Bouzid Mohammed, Djadi Amina and Guechtoulli Samira “Global Approach and Targeted Approach in the Management of Hospital Effluents” Journal of Materials Science and Engineering B 3 (4) (2013) 214-225,
• Siham Amirou, Abdelatif Zerizer, Imane Haddadouand André Merlin “Effects of corona discharge treatment on the mechanical properties of biocomposites from polylactic acid and Algerian date palm fibres” Scientific Research and Essays Vol. 8(21), pp. 946-952, 4 June, 2013.
• Ana Fernández-Jiménez, Fatima Zibouche, Nassima Boudissa, Ines García-Lodeiro, Mohamed Tahar Abadlia, Angel Palomo, « Metakaolin-Slag-Clinker Blends.” The Role of Na+ or K+ as Alkaline Activators of Theses Ternary Blends » Journal of the American Ceramic Society, Volume 96, Issue 6 (June 2013), pages 1991–1998
• Brahim Safi, Mohammed Saidi, Djamila Aboutaleb, Madani Maallem “The use of plastic waste as fine aggregate in the self-compacting mortars: Effect on physical and mechanical properties” Construction and Building Materials, Volume 43, June 2013, Pages 436–442.
• B. Hachemane, R. Zitoune, B. Bezzazi, C. Bouvet "Sandwich composites impact and indentation behaviour study"Composites Part B: Engineering, Available online 26 February 2013.
• S. Benbelaid, B. Bezzazi, A. Bezazi “ Modelling damage of composite laminates with different stacking sequences. Journal Advanced Materials Research Vol. 698 (2013) pp 1-10.
• C. Aribi, B. Bezzazi, A. Mir "Experimental Study for the Choice of a Matrix Epoxy Resin for the Elaboration of Laminates», Key Engineering Materials, Volume:550, Behaviour of Materials" , (2013), p.17- 24
• Irekti A., B. Bezzazi "Rheological Study of Composite Materials Based on Thermosetting Matrix and Fillers Mineral", Key Engineering Materials, Volume: 550, Behaviour of Materials" (2013) , p.79-84.
• A. Mir, C. Aribi, B. Bezzazi, "Fatigue Behaviour of the Laminates Jute/Epoxy" , Journal Advanced Materials Research, , Vol. 682 , 2013 p. 65-72. Materials and Structures. Trans Tech Publications.
• Bouziani T., Benmounah A. “Correlation between V- funnel and mini slump test results with viscosity”. KSCE. Journal of civil engineering (2013), 17 (1) p. 173 - 178.

Année 2012 :

• R.Tala-Ighil ,F. Chelli, S. Sali , S. Oussalah, M.Boumaour, F.Tayour, Y. Si-Ahmed ”Electrical and morphological study of screen printed silicon solar cells contacts” Archives des Sciences, Vol 65, No. 10;Oct 2012.
• Bahia Rabehi, Khaled Boumchedda1 and Youcef Ghernouti ” Study of calcined halloysite clay as pozzolanic material and its potential use in mortars” International Journal of the Physical Sciences 2012 Academic Journals Vol. 7(31), pp. 5179-5192, 16 August, 2012,
• Youcef Ghernouti, and Bahia Rabehi ”Strength and Durability of Mortar Made with Plastics Bag Waste (MPBW)” International Journal of Concrete Structures and Materials Vol.6, No.3, pp.145–153, September 2012
• Y Ghernouti, Alex Li and B Rabehi” Effectiveness of repair on damaged concrete columns by using fiberreinforced polymer composite and increasing concrete section” Journal of Reinforced Plastics and Composite, Edition Sages, December 2012; vol. 31, 23: pp.1616-1629.
• N.Dokhane, G.P.Puccioni, G. L. Lippi, Slow dynamics in semiconductor multi-longitudinal-mode laser transients governed by a master mode, Phys. Rev. A 85, 143823 (2012)- published April 16,2012, 137.
• S. Blizak, G. Bihlmayer, and S. Blügel, “Ab initio investigations of magnetic properties of FeCo monolayer alloy films on Rh(001)” Physical Review b 86, 094436 (2012).
• Chaid R., Jauberthie R. et Rendell F., « Action of seawater on the durability of concrete with marble powder addition », Revue : Indian Concrete Journal, Vol. 86, n° 5, Rs. 65, p. 07-16, may 2012.
• Irekti Amar, Hami Brahim, Aribi Chouaib, Bezzazi Boudjema "Dielectric Behavior Study Of Thermosetting Matrices Loaded" European Scientific Journal Vol 8, No 27 (2012)
• Aknouche H. et al " Mesure des efforts de défonçage et de la qualité finale en usinant en différents angles du fil, Journal "Bois et forêt des tropiques 2012, N° 3013 (3).
• Chaid R., Jauberthie R. et Abadlia M-T« Effet du chlorure de sodium sur la durabilité des BHP », Revue : Annales du Bâtiment et des Travaux Publics, Édition ESKA, n° 1-2, p. 71-80, mars 2012.
• M.S.Mansour, M.T.Abadlia, R.Janberthie and I. Messaoudene, ”Métakaolin as a pozzolan for highperformance mortar”Revue.”Cement Wapno beton”N°:02/2012 p.102 – 107,
• M. Oualit, M.T. Abadlia, R. Jauberthie, “Pérennisation des ouvrages en génie civil : diagnostic et inspection des bétons d’égouts. Annales du bâtiment et des travaux publics, p.25-31, N°3-4.2012.
• R. KheribetT, M. Samar, A. Benmounah, B. Safi, M. Saidi .Effects of alkaline and alkaline-earth ions on the rheological behavior and zetametric study of two cement pastes (artificial cement portland-CEMI and cement resistant to the sulfates-CRS) with the olynaphthalenesulfonate (PNS) (2012) .Scientific Research and Essays Vol. 7(34), pp. 3040-3052, 30 August, 2012.
• Tazrout Mansour; Abadlia Mohamed Tahar; Mothe Frédéric. "Microdensitometric study of recovery from collapse in eucalyptus camaldulensis dehn wood from beghla in algeria" Journal Bois et forêts des tropiques A. 2012, n° 312, pp. 63-75.
• Irekti Amar, B. Hami, C. Aribi, B. Bezzazi, I. Briki “Rheological behavior of the epoxy resin loaded with the pozzolan” Journal of Materials Science and Engineering (A & B),.(2012) pp.519-524.
• Salim Kennouche, Abdelatif Zerizer, Abdelhamid Aknouche, Marchal Remy "Influence of boiling temperature on the panels lvl (laminated veneer lumber) quality made with oak (canariensis) algeria wood" European Scientific Journal, Vol 8, No 18 (2012)
• T. Bouziani, A. Benmounah, M. Bedrina" Statistical modelling for effect of mix-parameters on properties of high-flowing sand-concrete" Journal of Central South University Press and Springer-Verlag Berlin Heidelberg (2012) 19: 2966−2675
• C. Nouveau, B. Tlili, H. Aknouche , Y. Benlatreche , B. Patel « Comparison of CrAlN layers obtained with one (CrAl)or two targets (Cr and Al) by magnetron sputtering”Thin Solid Films Volume 520, Issue 7, 31 January 2012, Pages 2932–2937.
• M. Oualit, R. Jauberthie, F. Rendell, Y. Melinge and M.T. Abadlia, "External corrosion to concrete sewers: a case study" Urban Water Journal 1, (2012)
• Mir A., Bezzazi B. , Zitoune R. , Collombet F, “Study of mechanical and hygrothermal properties of agglomerated cork”. Mechanika.. 2012 Volume 18(1): 40-45 .
• Benyounes Khaled, Benmounah Abdelbaki " Rheological and electrokinetic properties of carboxymethylcellulose-water dispersions in the presence of salts" International Journal of Physical Sciences, 2012 VOl.7(11), pp. 1790 - 1798, 9 March, 2012 .
• Nabil Khelifatia, b, Djoudi Bouhafsa, Messaoud Boumaoura, Seddik-El-Hak Abaidiab, Baya Palahouanea" Effect of extended phosphorus diffusion gettering on chromium impurity in HEM multicrystalline silicon" Materials Science in Semiconductor Processing Volume 15, Issue 1, February 2012, Pages 56–60 .
• F. Zibouche, H. Kerdjoudj, M. T. Abadlia, Structural characterization of mullite formed from heated kaolin of Tamazert deposit (Algeria) Asian Journal of Chemistry. Volume 24, No. 3 (2012), p.1111-1117 .
• Ben Belaid S. , Bezzazi B., Bezazi A-R. “Cross-Ply Laminates under Static Three- Point Bending : A Numerical Development Model” . Key Engineering Materials, volume 498, pp 42-54, (2012) .
• F. Zibouche, H Kerdjoudj M. T. Abadlia " Thermal behaviour of kaolin of Tamazert (Algeria) deposit" Asian Journal of Chemistry. Volume 24, No. 3 (2012), p. 1118 – 1123.
• Y. Didouche, M. Idouhar, « Characterization of An Effluent of An Algerian Oil Mill», Asian Journal of Chemistry; Vol 24, No. 1 (2012),P. 7-10.
• NH Arabi, A. Iratni , H. El Hamzaoui , B. Capoen , M. Bouazaoui , M. Halbwax , JP Vilcot et S. Bastide " Solgel antireflet TiO 2 films minces de silicium monocristallin et de silicium polycristallin texturé" Journal of sol-gel science and technology Vol 62, Number 1 (2012), 24-30.

Année 2011 :

• Youcef Ghernouti and Bahia Rabehi “FRP-confined short concrete columns under compressive loading: experimental and modeling investigation”Journal of Reinforced Plastics and Composites, , Edition Sage, February 2011; vol. 30, 3: pp. 241-255.
• Lakhdar Salim Guebboub, Massaoud Hamiane, Mouhyddine Kadi-Hanifi and Said Kamel. Characterization of a composite material in adobe subjected to natural weathering: The case of El Hara Djelfa- Algeria. International Journal of the Physical Sciences Vol. 6(25), pp. 5982-5987, 23 October, 2011.
• Abdelhakim Daoui, Clément Descamps, Rémy Marchal, Abdellatif Zerizer. Influence of veneer quality on beech lvl mechanical properties. Maderas. Ciencia y tecnología 13 (1): 69-83, 2011.
• S. Kennouche, A. Zerizer , R. Marchal, A. Aknouche, and A. Daoui," Resistance to Crack Propagation of Algerian Wood " Leonardo Journal of Sciences, Issue 19, July-December 2011 p. 69-80
• Mehena Oualit et al. Performance and Analysis of Concrete in Sewer Environment: Anisotropy of Damage, Applied Mechanics and Materials, 146, 147, December, 2011.
• A. Ayadi, N. Stiti, K. Boumchedda, H. Rennai, Y. Lerari, Elaboration and characterization of porous granules based on waste glass Powder Technology 208 (2011) 423–426
• Chaid R., Jauberthie R., Zeghiche J. et Kherchi F., « Impact de la poudre de marbre conjuguée au calcaire du CEM II sur la durabilité du béton », Revue : European Journal of Environmental and Civil Engineering, vol 15/3, p. 427-445, marsh 2011.
• Talah A., Kharchi F. and Chaid R., « Contribution of natural pozzolana to durability of high performance concrete in chloride environment », Revue : Indian Concrete Journal, vol. 85, n° 6, Rs. 65, p. 39-46, juin 2011.
• Redjem Belouettar, J. R. Klepaczko & M. T. Abadlia "Etude du comportement mécanique du béton cellulaire autoclaveé: influence de la vitesse de déformation" Revue Française de Génie Civil Volume 5, Issue 5, 2001, published: 05 Oct 2011, pp 667-675
• A. Ayadi, N. Stiti, F. Benhaoua, K. Boumchedda, Y. Lerari, Elaboration and characterization of a foam glass based on cullet with addition of soluble silicates Journal of American Institute of Physics, Volume 1315, (2011) pp. 1505-1510
• A. Ayadi, N. Stiti, F.Benhaoua, Y. Lerari, R.Benzerga, L.Legendre Elaboration and characterization of foam glass based waste Asian Journal of Chemistry Vol.23, 8 (2011) 3384–3386
• Bouziani Tayeb, Benmounah Abdelbaki, Bederina Madani and Lamara Mohamed, ‘’ Effect of Marble Powder on the Properties of Self-Compacting Sand Concrete’’, The Open Construction and Building Technology Journal, Vol. 5, (may 2011), pp 25-29.
• N. OUSLIMANI, F. ZIBOUCHE, A. IRATNI, M. T. ABADLIA. Adsorption of Yellow Bemacid CM-3R dye from Aqueous Solutions onto Raw and Sodium Bentonite Asian Journal of Chemistry. Volume 23 N°12 November 2011 .
• F. Kezzoula, Abaidia et al . Aluminium-induced crystallization of amorphous silicon films deposed by DC magnetron sputtering on glasses. Applied surface science, vol 257, issues 23 pages 9689-9693 septembre 2011.
• Saidi M., Safi B., Benmounah A. and Aribi C. ‘’ Effect of size and stacking of glass fibers on the mechanical properties of the fiber-reinforced- mortars (FRMs) International Journal of the Physical Sciences Vol. 6(7), pp. 1569-1582, 4 April, 2011 ; Available online at; 2011/ Academic Journals
• Safi B.; Benmounah, A. & Saidi, M.; “Rheology and zeta potential of cement pastes containing calcined silt and ground granulated blast-‐furnace slag”. Materiales de Construcción, Vol. 61, N°303 (2011), pp : 353- 370,

Année 2010 :

• T Bouziani, Z Makhloufi, A Benmounah, M Bédérina " EVALUATION DE LA THIXOTROPIE DES CIMENTS DESTINES A LA CIMENTATION DES PUITS DE PETROLE DANS LES ZONES A PERTES: Effet de plâtre et du laitier de hauts fourneaux" Revue des sciences fondamentales et appliquées, Vol.2 N° .2 (2010), pp 84-96
• B. Safi, A. Benmounah, M. Saidi and D. Aboutaleb "Effect of Calcined Silt on the Rheological Behaviour of Cement Pastes of the Self Compacting Concrete SC". European Journal of Scientific Research, 40(2), (2010), 287-296.
• Mohamed Khodja, Jean Paul Canselier, Faiza Bergaya, Karim Fourar, M, Abdelbaki Benmounah, Shale problems and water-based drilling fluid optimisation in the Hassi Messaoud Algerian oil field, Applied Clay Science, Volume 49, Issue 4, August 2010, Pages 383-393. Elsevier top25.sciencedirect.com
• M. Saidi, M. Hamiane, A. Benmounah, B. Safi- Optimization of the process of cooking and drying of brick; International scientific journal for alternative energy and ecology. ISJAEE 12 (92)2010
• M. Saidi, M. Hamiane, B. Safi and A. Benmounah, Development and Structural Study of Cements Containing Additions of Industrial Waste,. European Journal of Scientific Research, 40(2), (2010), 297-306.
• Abdallah MIR, Redouane Zitoune, Francis Collombet, and Boudjema Bezzazi. Study of Mechanical and Thermomechanical Properties of Jute/Epoxy Composite Laminate. Journal of Reinforced Plastics and Composites vol. 29 N°11, 2010.p.1669-1680, Edition Sage.
• S. Benbelaid, M. A. Belouchrani, Y. Assoul, and B. Bezzazi. Modeling Damage of the Hydrogen Enhanced Localized Plasticity in Stress Corrosion Cracking. International Journal of Damage Mechanics first published on June 3, 2010.
• K. Boumchedda,, A. Ayadi, T. Aouaroun, G. Fantozzi “Study of vibratory behavior of interconneted porous pzt by impulse method”, Journal European Ceramic Society 30 (2010) 101-105.
• N.Abderahim Mahinded, M.Hamiane. Identification of Mortars in the ottoman Era in Algeria through historical documentation and laboratory. RILEM Publications PP((257-265),), 2010.
• M.Hamiane, S.Aitouakli, L.Boumghar, W.Zekagh, M.Saidi. Design of jointing Mortar compatible with Masonry of the villa Maheddine of the ottoman Era. RILEM Publications PP(1023-1033), 2010.
• L.S.Guebboub, A.Ayadi, A.Hamlaoui, M.Hamiane; Etude portant sur les altérations et la restauration du verre Archéologique. Bulletin de l’association Française pour l’Archéologie du verre, pp (159-165) ,2010.
• M. Tazrout, MT Abadlia, A. Oudia. Collapse Reconditioning of Eucalyptus Camaldulensis Dehn from Algeria (Arboretum Bainem), Firenze University Press. 2010.
• M. S. Mansour, A. Abadlia, K.Bekkour: « Effet de la pouzzolane sur le comportement rhéologique des pâtes cimentaires », 9ème Colloque International de Rhéologie et ses Applications, Revue de mécanique appliquée et théorique, spécial numéro, vol. 2, 3. 255- 263 (2010)
• Linda Loucif Seiad, Didier Villemin, Nathalie Bar, and Messaoud Hachemi. Solvent-Free Condensation of Methyl Pyridinium and Quinolinium Salts with Aldehydes Catalyzed by DBU Synthetic Communications. print=1532-2432 online
• M. S. Mansour, M. T. Abadlia, K. Bekkour. “Improvement of rheological behaviour of cement pastes by incorporating metakaolin”. European Journal of Scientific Research (EJSR), Vol 42, Issue 3. 2010
• Chaid R., Jauberthie R. Et Boukhari A., « Effet de l’ajout calcaire sur la durabilité des bétons », Revue : Lebanese Science Journal, Vol. 11, No. 1, p. 91-103, 2010.
• Djamila Aboutaleb, Aicha. Iratni, B. Safi; «Ostwald ripening phenomena in B2O2-PbO glass system» Asian journal of chemistry 2009, Vol 22; N°3 (2010).
• Abaidia et al, Aluminium-induced crystallization of amorphous silicon films deposited by DC magnetron sputtering on glasses, Applied Surface Science, 2010,
• Abaidia et al, Unfolding of neutron energy spectra with fisher regularization, IEEE Transction on nuclear science, vol.57 n°2, 2010.

Année 2009 :

• Benmounah, M.Saidi, R.Kheribet, M.Samar, M .Debiane. ‘’Effets des sulfates sur le comportement rhéologique des pâtes cimentaires’’, 19e Congrès Français de mécanique 2009- Marseille du 24 au 28 Aout 2009. Section rhéologie et fluides complexes, université de Provence, Marseille.-France.
• Bezazi A., El Mahi A., Berthelot J.-M. & B. Bezzazi. Experimental analysis of behavior and damage of sandwich composite materials in 3-point bending. Part 2. Fatigue test results and damage mechanisms. « Strength of Materials », Vol.41. N°3, Juin, 2009.p.257-267.. Edition Link Springer New York.
• Y. Benlatreche, C. Nouveau, R. Marchal, J-P F. Martins, H. Aknouche ; “Applications of CrAlN ternary System inN WOOD machininG Of medium density fibreboard (MDF)”, Wear. Volume 267, Issues 5-8, 15 June 2009, Pages 1056-1061.
• Aknouche H; Outahyon A; Nouveau C; Marchal R; Zerizer A; Butaud J. C. Tool wear effect on cutting forces: In routing process of Aleppo pine wood. Journal of materials processing technology; 2009, vol. 209, no6, pp. 2918-2922 [5page(s). Cote INIST: 17574, 35400018672593.0220.
• Yacine Benlatreche, Corinne Nouveau,* Hamid Aknouche, Luc Imhoff, Nicolas Martin, Joseph Gavoille, Christophe Rousselot, Jean-Yves Rauch, David Pilloud “ Physical and Mechanical Properties of CrAlN and CrSiN Ternary Systems for Wood Machining Applications”. Plasma Process. Polym. Volume 6 (2009) ; pp 114- 117.
• Abdelhakim DAOUI, Clément DESCAMPS, Rémy MARCHAL, Abdellatif ZERIZER « INFLUENCE OF LATHE CHECKS ON BEECH LVL MECHANICAL PROPERTIES » Concepción-CHILIE, Mai 2011. Maderas. Ciencia y tecnología Concepción, 19/12/10 printed 0717-3644 Rubén A. ANANIAS SCISEARCH. SCOPUS. CAS. CSA. SCIELO 2009 Impact Factor: 0.367.
• Malek Ammar, Hachemi Messaoud, Villemin Didier / New approach of depollution of solid chromium leather waste by the use of organic chelates. Economical and environmental impacts. Journal of Hazardous Materials. 170 (2009) 156-162. 2009.
• M. Tazrout, M.T. Abadlia et P. Perre : « Caractérisation du comportement mécanique différé du bois d’Eucalyptus camaldulensis Dehnh vert provenant de Boudouaou (Algérie) à haute température (120 ◦C) », Revue, Matériaux & Techniques 97, 181–188 (2009), EDP Sciences.
• Fatima Zibouche, Hacène Kerdjoudj, Jean-Baptiste d’Espinose, Henri Van Damme. Geopolymers from Algerian metakaolin. Influence of secondary minerals. Applied Clay Sciences. Vol 43, Issue 3-4, Mars 2009.
• Slimani, A. Iratni, J.-N. Chazalviel, N. Gabouze, F. Ozanam . Experimental study of macropore formation in p-type silicon in a fluoride solution and the transition between macropore formation and electropolishing. Electrochimica Acta Journal: 2009, vol. 54, no11, pp. 3139-3144 ..
• H.Belkhafa, R.Tala Ighil, S.Sali, S.kermmadi, S.Sili, M.Boumaour, F.Tayour, F.Ait Amar et Si Ahmed : « Effet du recuit de la métallisation par sérigraphie sur les propriétés optiques des couches minces de ZnO déposées par spray. » Revue des Energies Renouvelables Vol.12 N°3(2009) 347-354 46
• Abaidia et al, Elaboration and structural analysis of TiN coating on steel and Titanium alloy substrates, International Review of PHYSICS, 2009.

Année 2008 :

• D. Aboutaleb, A. Iratni and B. Safi; Effect of isothermal heat treatment time on structural transformation and crystallization of B2O3-PbO glass, Matériaux & Techniques Vol. 96, 4-5, (2008), pp. 181 – 187.
• Slimani A, A. Iratnia, et all. Experimental study of macropore formation in p-type silicon in a fluoride solution and the transition between macropore formation and electropolishing, Electrochimica Acta,, Elsevier, 2008.
• H. Aknouche, A. Outahyon, C. Zerizer and J.C. Tool wear effect on cutting forces: In routing process of Aleppo pine wood, Journal of Materials Processing Technology, 2008.
• Bouhafs, Moussi, Boumaour, Abaidia, Mahiou. N+ silicon solar cells emitters realized using phosphoric acid as doping source in a spray, Thin solid films,.
• Abaidia et al.; Structural Study And Optical Properties Of TiO2Thin Films Elaborated By Thermal Oxidation Of RF Magnetron Sputtered Ti Films, Laser and Plasma Applications in Materials, Science, 2008 American Institute of Physics 978-0-7354-0575-2/08/$23.00.
• H. Aknouche, A. Zerizer, B. Chemani. Influence de L’angle d’inclinaison des cannelures sur le comportement à L’usure des cylindres broyeurs de blé, European Journal of Scientific Research, Vol.19 No.2 (2008), pp.215-221, .
• Malek A; M. Hachemi. Effet of the detoxification on the shrinkage temperature and pH of chromium leather waste, another promising way for the tannery pollution, American journal of Applied Science 5, 2008.
• Daoui A. Zerizer A. R. Marchal. Determination of elasticity modulus of aleppo pine wood (Pinus halepensis mill.) with the ultrasound methods/ ProLigno 2008 Issue 4 / Scientific Article, Vol. 4. nr 4. December 2008
• Malek A; M. Hachemi. New approach of solid leather waste depollution by the use of organic chelating economic and environmental impacts, Journal of hazardous materials. Elsevier, 2008.
• Ghernouti Y, Ait tahar K. «Multiple confinements of concrete columns by various embedded composite grids ", Journal of reinforced plastics and composites- SAGE Publications /2008.
• Fatima Zibouche, Hacène Kerdjoudj, Jean-Baptiste d'Espinose, H. Van Damme. Geopolymers from Algerian metakaolin. Influence of secondary minerals Applied Clay Science, Volume 43, Issues 3-4, (2008). Pages 453-458.
• Malek A; M. Hachemi. Chemical coagulation /Floculation treatment of chemical mechanical polishing (CMP) wastewater from photovoltaic industry. Accepted manuscript. Journal of Hazardous materials. Juillet 2008

Année 2007 :

• Chaîd R., Jauberthie R., Abadlia M-T. et Bali A. « Caractéristiques physico-mécaniques et microstructurale des BHP de laitier », Revue : Annales du Bâtiment et des Travaux Publics, Édition ESKA, Avril - Juin 2007, N° 2- 3, p. 49-56.
• D.Bouhafs1, A Moussi1, M Boumaour1, S E K Abaîdia, L Mahiou1 and A Messaoud. Influence of the organic solvents on the properties of the phosphoric acid dopant emulsion deposited on multicrystalline silicon wafers. Journal of physics D: Applied Physics. 40 (2007) 2728–2731. Published 19 April 2007.
• D Bouhafs1, S. Abaidia et all. organic solvents on the phosphoric acid dopant on multicrystalline, J. Phys. D: Appl. Phys. 40 (2007) 2728–2731; Journal of physics D: Applied Physics.
• D.Bouhafs1, M Boumaour1, A Moussi1,S E K Abaîdia and L Mahiou1. 10x10 cm² multycristalline silicon solar cells realised with H3PO4_2 butanol emulsion as phosphorous doping source. Journal of the association of arab universities for basic and applied sciences, 2007.
• Bezazi, A El Mahi, J.M. Berthelot, B Bezzazi. Experimental analysis of behavior and damage of sandwich composite materials in three point bending. Part 1. Static tests and stiffness degradation at failure studies. Joural, strength of materials. Vol. 39, N°2, Mars 2007. Editeur Springer Science. New York..
• Boumchedda K., M. Hamadi, G. Fantozzi. Properties of a hydrophone produced with porous PZT ceramic; Journal European Ceramic Society 27 (2007) 4169-4171.
• Zerizer A et all: “Experimental Method for determining fracture Parameters of Glued Wood: Case of MDF” Proligno Scientific journal in the field of the wood Vol. 3. No 2. 2007
• Zerizer A et all ’’ valorisation du bois de pin d’Alep par déroulage : optimisation de son étuvage’’ Revue bois et forêts des tropiques, N° 294 (4) (51, 65), 2007
• Dehmous H, Welmane H, Karama.M, Ait tahar.k. “ Reliability approach for fibre-reinforced composite design”, International Journal for simulation and multidisciplinary design optimization, IJSMDO//ISI/02, vol 2 p1-9 Ed. EDP, , 2007.
• Zerizer A et all ‘’Liaison entre effort de coupe, densité et états de surface de quelques composites à base de bois“ Mécanique & Industries 7.521-526(2006) publié en ligne le 21 Mars 2007.
• Dehmous H, Welmane H, Karama.M, Ait tahar.k. “ Reliability approach for fibre-reinforced composite design”, International Journal for simulation and multidisciplinary design optimization, IJSMDO/2007/ISI/02, vol 2 p1-9 Ed. : 1779-627X.
• Hamiane Messaoud. Caractérisation des mortiers archéologiques, le cas des sites historiques de Djemila et de la citadelle d’Alger). Rehiabimed en ligne.2007.
• Chaid R, Abadlia M-T et all. Apport des fillers calcaires à la durabilité des BHP en milieu sulfatique. Revue: Matériaux & Techniques, EDP – sciences.

Année 2006 :

• Zerizer A, Ouis D. Modeling rot in wood by replacement of wood with sand: an experiemental method. Journal of wood science (2006) Volume 52, Number 3, 2006. The Japan wood research Society.
• F. Zibouche, H.Kerdjoudj. Rheological Properties of the Tamazert’s Kaolin; European Journal of Scientific Research Vol.13 N°1 (2006), pp. 22-30; EuroJournals publisching, Inc.2006,
• R.Tala –Iglil, M. Boumaour, M.S. Belkaid, A. Mallemi, K. Melhani and A. Iratni " High temperature annealing of sprayed SnO2. F layers in a silicon solar cell process with sreen- printed contacts, Solar Energy Matrail and Solar Cells 90(2006) 1797-1814 (40
• R. Tala-Ighil, M. Boumaour, A. Iratni, A. Maallemi, The effet of CO reducing atmosphere on the structural and optical properties of SnO2: F films deposited on a SI(N+)/Si(P): Journal 2006,
• Zerizer et P. Martin. Liaisons entre effort de coupe, densité et états de surface de quelques composites à base de bois. Mécanique & Industries 7. 521-526 (2006)
• D. Djenane, A. Meddahi, P. Roncalès. Les systèmes antioxydants et antimicrobiens pour la conservation de la viande" Antimicrobial and antioxidant systems for meat preservation. Édition Lavoisier, revue sciences des aliments, pp 37-73. VOL 26/1–10 janvier 2006.
• H. Chemani, J-P Bonnet, M. Nabiev. Elaboration et caractérisation de poudres SnO2 formées à partir de solutions concentrées et diluées d’acide perchlorique. Silicates industriels, Vol 71 N° 11-12, 197-2003, 2006,
• H. Chemani, J-P Bonnet. Influence de l’ajout de frittage (Fe2O3) sur l’évolution morphologique et microstructurale des poudres céramiques SnO2. L’industrie céramique & verrière N° 1005, 86-93. Mars- Avril 2006.

Année 2005 :

• Zerizer A, Martin P. “Connection between cutting pressures, density and surfaces qualities of some wood containing composites” EJSR European Journal of scientific research Vol.7 N°5, 2005.
• Abaîdia S, Kezoula F, Guitoum A. Journal of vacuum science technology. A35-2260, 2005.
• A.Zerizer et P. Martin. « Etude des efforts de coupe et de l’état de surface en toupillage: European Journal of Scientific Research Volume.7, N°5, 2005.
• K. Boumcheda, J. Paletto, A., G. Fantozzi. Study of proprieties of porous piezoelectric ceramics and impregnated with polymer. J. Phys. IV France 123 (2005) 171-176.
• Azzedine Ayadi. The durability of alkali-resistant glass fibres in cement matrix, Journal de physique 123 (2005), 155-158, EDP Sciences
• Ayadi A. Palou M. The durability of glass fibers in ciment matrix. Journal de physique 2005, France.

Année 2004 :

• K. Boumchedda, M.T. Abadlia, A. Kondratas, G. Fantozzi. Elaboration and parameter analysis of porous PZT piezoelectric ceramics. 2004. Nr.1 (45).
• Chaid R.abah. Influence of a natural pozzolana on the properties of high performance mortar », Indian Concrete Journal, 78 (8) 22−26, 2004. H. Chemani. Valorisa􀆟on desdéchets de lampes d’éclairage publicet de néons dans les pâtes de carreaux de faïence. L’Industrie céramiques et verrière, N°995, 60-65, juillet- Août 2004Chaid R.abah. Influence of a natural pozzolana on the properties of high performance mortar », Indian Concrete Journal, 78 (8) 22−26, 2004. H. Chemani. Valorisa􀆟on desdéchets de lampes d’éclairage publicet de néons dans les pâtes de carreaux de faïence. L’Industrie céramiques et verrière, N°995, 60-65, juillet- Août 2004
• Azzedine Ayadi. Elaboration et caractérisation d’un verre mousse à base de calcin, Journal Verre, France-, vol 10, n° 2 – mai 2004, p 68-71
• Ait Tahar K., M. Karama, B. Bezzazi, Dehmous H., A. Kondratas. The Influence of Fiber and Combinaison on Rupture Stress and on Elasticity Modulus of Hybrid Composite Material. « Mechanika. 2004, Nr. 5(49). p.25 –30.
• K. Khider, D.E Akretche, A. Larbot. Purification of water effluent from a milk factory by ultrafiltration using Algerian clay support. Desalination 167 (2004) 147-152.
• Abaîdia S, Kezoula F, Guitoum A. Journal of vacuum science technology. A35-2260, 2005
• Abaîdia S, Kadi A, Kezoula F. Thin Film science, 47,135, 2005.

Année 2003 :

• Azzedine Ayadi, Martin Palou, Aicha Iratni. Silica fume treatment for Improving durability of Alkaliresistant glass fibres in cement matrixes. “Journal of Solid State Phenomena, Volume 90-91, p 209-214, 2003.
• M. Palou, A. Ayadi, J.Mayling, M. Drabik. Ettring & its chromate analogue, structure and thermal stability. “Journal of Solid State Phenomena”: Volume90-91, p395-401, 2003.Trans Tech Publications Ltd, Brandrain 6, CH-8707
• Bezzazi B., Amrouni F., Bezazi A., El Mahi A., Kondratas A. Analysis of Elastoplastic Behaviour of the Chain Linear Link in Chain Coupling. The international journal « Mechanika. 2003, Nr. 2(40). P.25 –30.
• Bezzazi B., Amrouni F., Bezazi A., El Mahi A., Kondratas A. Elastoplastic Behaviour Modeling of the Chain Linear Link in Assembly Process. The international journal « Mechanika. 2003, Nr. 1(39). P.21 –26.
• Bezazi A., El-Mahi A., Berthelot J.M., Bezzazi B. « Flexural fatigue behavior of cross-ply laminates.An experimental approch. The international journal « Strength of Materials »N° 2, (March-April) 2003, p.149 - 161.
• Hachemi M. Synthesis of methylen thermochromic compound under microwaves. Journal of Chemical Research, Volume 2003, Number 7, July 2003
• Bezazi A., El-Mahi A., Berthelot J.M., Bezzazi B. Soprativlenie oustalosti perekresno-armirovannikh laminatob pri izguibe.The international journal “Problemi prochnosti” N°2, 2003, p.66-83. Edition de l’académie des sciences Ukrénienne..
• Zerizer A, Mansseri A. “Usinabilité et qualification des états de surface du chêne zeen Algérien (Quercus Canariensis Willd) : cas de la station de beni ghobri, wilaya de Tizi Ouzou, Revue Sciences & Technologie, N°19 (2003). Pp. 76-80.
• Zerizer A, P.Martin, C. Sales, P.Tribolot: Edge machinability of MDF, effect on surface quality and consequence for gluing. Revue Sciences & Technologie de l’Université Mentouri de Constantine. N°20, Décembre 2003.
• Hachemi M. A easy synthesis of thermochromic ethylenes under microwaves. Journal of Chemical Research. 260, (2003),.
• Abaidia S., Wiedenmann A.“ Exelfs analysis of AlN structure“, Journal Physica B, 2003.
• Abaidia S., Blizak S., Wiedenmann A. X-ray reflectometry charaterisation of thin amorphous multilayers“, Journal Physica B. 2003.

Année 2001 :

• Abadlia M-T., Bellouetar R., Clepaczko J.R., « Etude du comportement mécanique du béton cellulaire autoclavé: influence de la vitesse de déformation », Revue française de génie civil, Vol 5, N°5, Paris, France, (2001).
• Hachemi M., « Cesium fluoride on calsium oxide as a strongly basic catalyst. Synthesis of flavones and Tabacco alcaloids », React.Kinet.Catal.Leter, Vol 72, N°1, pp. 3-10, (2001).
• Ait-tahar K., « Mode de rupture par flexion des poutres composites en béton de fibres », Annales de l'' I.T.B.T.P, N°4, Paris, France, (2001).
• Hachemi M., Djenane M., « Récupération de déchets de peaux brutes algériennes et leur valorisation dans l'industrie papetière », Revue I.D.C. 02. pp. 37-43. France, (2001).

Année 2000 :

• Ayadi A., « Industry of glass in Algeria, J. of Glass and Ceramic », , Czech Republic-4, (2000).
• Hachemi M., « Liquid and solid acids as catalysts for the Thiele-Winter reaction of Menadiome », Journal research (S) 356-358, , (2000).
• Ait-tahar K., « Etude expérimentale des poutres combinées en béton de fibres », Annales de l'' I.T.B.T.P, N°3, Paris, France, (2000).

Publications Nationales :

Année 2013 :

• Zibouche F, A.Ferna´ndez - Jime´nez, N. Boudissa, A.Palomo, M.T Abadlia,” Hybrid cements from metakaolin, slag and clinker mixtures. Influence of activators” Journal of Materials, Processes and Environment, Vol.1 (01) (2013). pp 13-17.
• Halimi R., Bezzazi B., Badidibouda A., Satour A., Aribi C,”Inspection of laminated composite materials by two ultrasonic techniques “Journal of Materials, Processes and Environment ,Vol.1 (01) (2013).pp 05-08.
• Djadi. A, Bouzid. M, Guechtoulli. S.‘’ Conception et réalisation d’un laveur désinfecteur d’endoscop ‘’. Journal of Materials, Processes and Environment, Vol.1 (01) (2013). pp 18-23.
• Bouzid. M, Djadi. A, Guechtoulli. S, F, Halouane. F.’’ Approche globale et approche ciblée dans la gestion des effluents hospitaliers. Application centre de transfusion sanguine, laboratoire sérologie, CHU de Blida’’. Journal of Materials, Processes and Environment, Vol.1 (01) (2013). pp 39-43.
• Bousalah-Boubechiche.D, Ait Ahsene-Aissat.F, Hachemi M.‘’ Elimination des métaux lourds en vue de la valorisation des boues d'épuration chimique des eaux usées de traitement de surface (cas de BCR)’’. Journal of Materials, Processes and Environment, Vol.1 (01) (2013).pp 48-51.
• Lakreb. N, Bezzazi B. ‘’ Etude et analyse du comportement mécanique d’une structure Sandwiche à âme multicouches en liège’’. Journal of Materials, Processes and Environment, Vol.1 (01) (2013). pp 52-61.
• Hami B., Irekti A., Bezzazi B- Etude du comportement au choc d’un Matériau Composite renforcé par des Fibres de Verre. Journal of Materials, Processes and Environment, Vol.1 (01) (2013) pp 57-59.
• Aboutaleb D., Safi B., BenhaouaF.” Preparation and characterization of B2O3- BaO-Al2O3 (BBA) glass system”. Journal of Materials, Processes and Environment, Vol.1 (01) (2013) pp 62-66.
• Irekti A., Hami B., Aribi C., Abadlia M.T.” Static and cyclic behavior of concrete reinforced with materials composite”. Journal of Materials, Processes and Environment, Vol.1 (01) (2013). pp 67-72.
• anafi Y., Baddari K., Szymczyk A., Zibouche F.‘’Caractérisation de la densité de charge de surface de membranes nanoporeuses ‘’. Journal of Materials, Processes and Environment, Vol.1 (01) (2013).pp 73-76

Année 2012 :

• Chaid R., Bali A., Jauberthie R., Talah A.,« comportement des BHP de laitier en milieu sulfatique », Revue : Synthèse, n° 24, p. 91-99, avril 2012.
• Chaid R., Jauberthie R., Talah A. Et Abadlia M-T., « Fluage, retrait et microstructure des BHP de pouzzolane naturelle de Beni-Saf », Algérie Équipement, n°47, p. 28-34, Mai 2010.
• Chaid R., Abadlia M-T., Bali A. Et Jauberthie R., « Résistance chimique des BHP conservés dans l’eau séléniteuse », Revue : Sciences, Technologies & Développement, ADRU, n°6, volume 1, p. 245-258, 2010.
• Chaid R., Jauberthie R., Talah A. Et Abadlia M-T., « Fluage, retrait et microstructure des BHP de pouzzolane naturelle de Beni-Saf », Algérie Équipement, n°47, p. 28-34, Mai 2010.
• Chaid R., Abadlia M-T., Bali A. Et Jauberthie R., « Résistance chimique des BHP conservés dans l’eau séléniteuse », Revue : Sciences, Technologies & Développement, ADRU, n°6, volume 1, p. 245-258, 2010.
• Abaidia et al., Corrections des cartographies des flux de neutrons obtenues avec les détecteurs solides de traces nucléaires, Algerian Revue of Nuclear Sciences, Vol.8, N°1&2, 2010.

Année 2009 :

• A .Benmounah, M Samar, A.Daoudi, R. Kheribet, M. Debiane, M. Saidi/ Influence de la nature des superplastifiants sur le comportement rhéologiques des pâtes cimentaires: application a la formulation des bétons autoplaçants .Bulletin du Centre d’études et de services technologiques de l’industrie des matériaux de construction CETIM N0 15 Décembre 2009.
• Benmounah, M Samar, R.Kheribet M.Saidi Comportement rhéologiques des pâtes cimentaires pour bétons autoplaçants, Revue NATEC N° 1 JUIN 2009, 260-270.
• Chaid R., Jauberthie R., Abadlia M-T. et Bali A., « Etude expérimentale de la durabilité des BHP aux ajouts cimentaires locaux », Revue : Sciences & Technologie, B – N°27, p. 55-60, Juin (2008).
• Guiciouer D, Ait tahar K, Caractérisation expérimentale d’un béton de structure composite hybride. revue Equipement Algérie, N° 43 Décembre 2007, pp 32-37.
• Chaid R., Bali A., Abadlia M-T. et Jauberthie R., « Influence des cycles immersion - séchage sur la durabilité des BHP de fines calcaires », Revue : Algérie Equipement, Ecole Nationale des Travaux Publics, n°42, décembre 2006, p. 7-9.

Année 2008 :

• B. Hachemane, B. Bezzazi, « Influence du chargement cyclique en flexion 3-points sur le comportement d’un matériau composite ». Algerian Journal of Advanced Materials5, 491, Novembre 2008.

Année 2004 :

• Chaid R, Abadlia MT, Bali A, Jauberthie R, « Formulation des bétons de hautes performances avec des ajouts cimentaires", Revue : Algérie Equipement, n°38, p. 3-7, janvier 2004.

Année 2003 :

• Ait-tahar K., Gabi S, bellakrouf A."Portance des fondations des ouvrages portuaires en caissons cylindriques de grand diamètre", Revue Algérie- Equipement, juillet 2003.